power washer won't start hard to pull

Pull and hold lance trigger. Start by checking behind the washer for the power plug.

Pressure Washer Starts Then Stalls Repair Clinic

It is surprisingly common for the washers shaking to pull its own power plug out of the wall.

. If you tipped the pressure washer on its side recently oil may have filled the cylinder preventing. Check the Power Plug and Breaker. Pressure washer Cord Hard To Pull Simple fix Set gas choke and switch to On.

Turn garden hose on. Make sure the rocker switch that controls the engine is in the On position. In this post youll learn why your pressure washer is stiff to pull and what to can do to avoid the.

If the starter rope wont budge when you try to pull it the engine may be locked up or the recoil starter may have failed. Repair or replace the pressure washer recoil starter. Jeffs Little Engine Service shows you HOW TO fix a common problem on a HONDA model GCV 190 pressure washer engine that is HARD to PULL HARD to START.

This can happen for a few different reasons but there are only two solutions. The number one reason why your washer suddenly stops working is that it has no power. The engine wont start if the engine is out of fuel.

Replace the recoil starter if the spring breaks or if the recoil starter wont engage the engine. When the engine on your pressure washer wont start follow these troubleshooting tips to fix the problem. If the pull rope doesnt retract its likely that the spring inside the recoil starter is broken.

The recoil starter can also fail to engage the engine when the rope is pulled. If the pressure washer engine doesnt spin as you pull out the recoil starter rope you probably need to replace the recoil starter because its not spinning the flywheel.

Why Doesn T My Pressure Washer Recoil Starter Work